Unique Solutions

Gas Analyzer

A gas analyzer is a device that measures the composition of gases. It can be used to identify and quantify gases in the air, liquids, and solids. Gas analyzers are ideal for detecting hazardous gases and determining the composition of gases in industrial processes.

Portable Single Gas Detector / Monitor


A single-gas detector is a device that detects the presence of any gas within an area, usually as part of a safety system. This type of Single-Gas Detector Equipment is used to detect a gas leak and interface with a control system so a process can be automatically shut down. A gas detector can also alert operators in the vicinity of the leak, allowing them to leave the area.

We supply an immense choice of gas finders and screens for various applications like oxygen, combustible gases, and carbon monoxide. The gas detector adopts an embedded MCU controller detector adopts and is easy to operate.

These units can be provided with sensors to recognize the most well-known gases as well as a scope of more extraordinary gases for changing applications. VS-70 xx portable gas detector locators are additionally accessible with a PID sensor to identify the presence of volatile natural compounds and with infrared IR sensors for the estimation of CO2 and other combustible gases.

Multi Gas Detectorr


VM-4 AS Multi-gas detectors can detect multiple gases with a single detector. The multi-gas detector can detect combustible gas, O2, and other two types of toxic gases continuously and simultaneously. It is widely used in areas where explosion-proofing is required or toxic gas leaks, like underground channels or the mining industry, to protect the worker's life and avoid damage to the relevant equipment.

VM-4 AS Multi-Gas Detector, which is simple to utilize and supports carbon monoxide (CO), hydrogen sulfide (H2S), combustible gases, and oxygen (O2) exhaustion or enhancement. Presently, with the further development of the identification of pentane, hexane, and other long-chain hydrocarbons, offering you consistency, strength, and minimal expense of possession in an easy-to-utilize arrangement. The multi-gas detector contains a wide scope of amazing components to make regular use simpler and more secure.

Extractive Flue / Stack Gas Analyzer


The gas analyzer OMGA-2000 UV online monitoring gas analyzer is a one-site installation gas analyzer that has been developed after years of research and design on online gas analysis instruments. It can monitor gas parameters including the concentration of SO2, NOx, O2, dust, humidity, temperature, flow, etc. It is widely applied to tall gas emission monitoring and process analysis in many fields, including coal-fired power plants, waste-to-energy plants, cement factories, glass factories, lime factories, sinter coke ovens, the DeSox process, and the DeSox process flow principles.

In-Situ Flue / Stack Gas Analyzer


The OMGA-2000 Flue Gas Analyzer is a highly integrated single-flange gas monitoring equipment, of which the core detection module adopts nondispersive infrared (NDIR) and differential optical absorption spectroscopy (DOAS) gas absorption technology with independent intellectual property rights. The specially designed measuring cell effectively improves optical path length for gas absorption, which can measure trace gas accurately inside the pipeline!The ILTA-1000 can be widely applied in online gas monitoring situations including denitrification devices, boiler flues, exhaust detection, etc. One piece of equipment can realize online monitoring for multiple gas components, such as CO, CS, NO, NO„, etc.

In Situ TDLAS Gas Analayzer


The ITLA-1000xx (In-Situ Tunable Laser Analyzer) laser gas analyzer is a highly precise analyzer for gas measurement, developed based on tunable diode laser absorption spectroscopy. One-side mounting installation is much easier than cross-stack. By using a tunable semiconductor laser, the ITLA-1000xx series laser gas analyzer scans the specific absorption lines of the measured gas (no background gas) to get the second harmonic of the gas. Through processing and analyzing the second harmonic and the broadening information of the gas, the concentration of the gas is obtained.

Cross Duct Gas Analyzer


The VGA-1000 is a flameproof tunable laser gas analyzer based on TDLAS technology that can in-situ analyze 02, CO, NH3, CO2, CH4, H2O, HCI, HF, and other gases in various complex conditions. It consists of a transmitter, receiver, and connection box. The transmitter drives the tunable diode to emit a laser of certain wavelengths, which passes through the environment to be measured, then reaches the receiver. The receiver performs photoelectricity conversion, signal processing, and spectrum data analysis to obtain the measuring result. The connection box contains a 1/0 interface, making the connection of the power cable and signal cable convenient.

Fixed Gas Detector


Vasthi's VT-60 fixed gas detection device provides 24/7 protection for your entire industrial area. It can also be connected to a detection system that displays the gas concentration numerically and triggers an alarm if the value is abnormal.

Gas detectors are one of the most important devices to keep industrial sites safe. Gas leaks in a busy industrial environment can easily turn into a disaster. Many types of gas sensors are available at Vasthi Instruments to monitor and alert personnel in the event of a gas leak. A fixed gas detector is highly recommended to monitor the air quality of the industrial environment.

CO Analyzer-MEZUS 310


A device that measures the concentration of carbon monoxide generated in various paths, such as automobiles, city gas, coal, and firewood, such as smoking, using a non-dispersive infrared absorption method.

O₃ Analyzer-MEZUS 410


A device that measures concentration of ozone generated by photochemical reaction by ultraviolet rays among sunlight rays such as nitrogen oxide (NOx) and hydrocarbons (HCs) contained in automobile exhaust gas and factory exhaust gas using ultraviolet lig.

CO₂ Analyzer-MEZUS 320


A device that measures the concentration of carbon dioxide generated in various paths, such as automobiles, city gas, coal, and firewood, such as smoking, using a non-dispersive infrared absorption method.

SO₂ Analyzer-MEZUS 110


A device that measures the concentration of sulfur dioxide gas released into the air by oxidizing sulfur contained in crude oil when refining oil or burning heavy oil using UV fluorescence.

NOx Analyzer-MEZUS 210


A device that measures the concentration of sulfur dioxide gas released into the air by oxidizing sulfur contained in crude oil when refining oil or burning heavy oil using UV fluorescence.

SO₂ Portable Analyzer M100


A measuring instrument that measures SO₂ in the atmosphere that is easy to move and store.

NOx Portable Analyzer M200


A measuring instrument that measures NOx in the atmosphere that is easy to move and store.

CO Portable Analyzer M300


A measuring instrument that measures CO in the atmosphere that is easy to move and store.

O₃ Portable Analyzer M400


A measuring instrument that measures O₃ in the atmosphere that is easy to move and store.

Multi-gas Calibrator M510


Calibration device for accurate data measurement of gas meter.

Zero air generator M520


Calibration device for accurate data measurement of gas meter.

Particulate Portable Monitor (Battery type) M600


A measuring device that measures fine dust (PM10/PM2.5) in the atmosphere that is easy to move and store. (last for 3days)

Particulate Portable Monitor MEZUS600


A measuring device that measures fine dust (PM10/PM2.5) in the atmosphere that is easy to move and store.